Friday, May 09, 2014

The spillway

This is probably not technically a spillway, nor is it a dam. It could be called a weir, but that's not a word we Americans would normally use. In French, it could be called un déversoir or un seuil. In this case, a concrete structure is built across the point at which the Cher River splits around an island. The river's flow is backed up behind a bridge at Saint-Aignan to provide water power to a mill that once stood there. This spillway allows excess water to flow around the island rather than flood lands further upstream.

The spillway on the Cher at Saint-Aignan. On this day it was dry.

When the river level is low enough that all of its flow passes over the dam at the bridge, the spillway becomes dry and the water in the river's northern channel is shallow and still. When upstream rains cause the water level to rise, it flows over the spillway and rejoins the main channel downstream.

5 comments:

  1. Everyone around here, including the river technician Johan...
    refer to our wier as a "barrage"....
    is it down to size??...
    and our miilstream...
    a "bief" in French...
    would be called a "leat"...
    or "mill-leat"...
    or even "cut" in Yorkshire...
    isn't language wonderful...
    we can all understand each other...
    can't we??

    ReplyDelete
    Replies
    1. I missed out the important word...
      a wier is also known in Yorkshire as an "overspill"...
      so very much linked to your "spillway"!

      Delete
  2. You're sure right that a weir is not a word we Americans hear or use often (like, never!).

    Enjoy your anniversary weekend with your new stove :)

    ReplyDelete
  3. I've never heard of weir before either - even with all the dams in Oregon and espoecially since my Dad worked on them we had to see them when and wherever we went for a roadtrip!

    Another aha moment...

    ReplyDelete
    Replies
    1. Interesting -- this software can read minds...I had to identify letters that spelled my Dad's name just now!

      Delete

Tell me what you think!